---
title: "Select Measurements tool"
description: "Measure your drawing and then quickly add all the necessary measurements to the spreadsheet within a few minutes"
url: https://help-takeoff.kreo.net/en/articles/5832813-select-measurements-tool
collection: "Ways of transferring measurements"
updated: 2026-10-26
language: en
alternates: [fr]
---

# Select Measurements tool

Measure your drawing and then quickly add all the necessary measurements to the spreadsheet within a few minutes

# **Introduction**

**"Select measurements"** mode helps you to quickly add all necessary measurements to the spreadsheet in a couple of minutes. Simply enable the mode, select a cell, then select measurement and repeat this action until all measurements are in the spreadsheet.

# **How to use the feature?**

To enable the **"Select measurements"** mode, either click on the button placed on the right side of your working area or press the **"S"** button.

To add a measurement to the spreadsheet, select the relevant cell there first, then click on the measurement.

To finish adding measurements, either press **"S"** or **"Escape"**.

📝 **Note!**

1.  _Using this mode, you can add measurements to the spreadsheet only when the_ **_"Select measurements"_** _option is enabled._
    
2.  _When the_ **_"Select Measurements"_** _button is active, you can also click on the measurement label of any item to add the measurement to your spreadsheet. In such a case, the area of the relevant item will be added there._